|
|
|
Hydro-Press Head Plate (top)
|
| |
|
Quantity in Basket:
None
Catalog No.: CHP-HP
Price: $234.00
Shipping Weight: 4.00 pounds
|
| |
The "head plate" or "top plate" is a steel rectangle mounted
at the top of the press support rods, with a threaded hole
for the punch holder (or reloading die or adapter bushing).
The standard CHP-1 press, and CSP-2 Mega Mite hand press,
have a 1-1/2 inch x 12 turns/inch thread.
Dimensions
- Thickness: 1-inch
- Width (front to back): 3 inches
- Length (side to side): 6 inches
- Mounting hole spacing (for support rod) center to center: 4 inches
Smaller threaded dies and tooling can be used by getting one
of the many adapter bushings available. A 7/8-14 adapter
comes with the press, to use standard reloading dies. But
you can get 1-1/4 x 12, 1-in x 12 or 1-in x 14, and other
bushings from Corbin.
Larger threads, or even the same size hole with a different
thread, can be handled by removing the standard head plate
and replacing it with a custom made head, having the
thread you need for a special application.
Usually, these special thread head plates are not in
stock (because there are so many possible sizes). We make
them to your custom order.
The custom head plates are listed as "CHP-HPC" on another
page. You can link to it below. If you order here, you
are ordering the standard 1-1/2 x 12 thread head plate.
This plate fits both the CHP-1 Hydro Press and the CSP-2
Mega Mite press.
|
Related Item(s)
|
Code
|
Name
|
Price
|
Availability
|
|
|
CHP-S2H
|
Ram Adapter, 5/8-24 to 1-12
|
$59.00
|
|
|
CHP-B2
|
Adapter Bushing, 1.5x12 to 1.25x12
|
$159.00
|
|
|
APA-2-H
|
Arbor Press Anvil Kit for CSP-2, CHP-1
|
$200.00
|
|
|
CHP-B
|
Adapter, 1.5 x 12 OD, custom ID.
|
$155.00
|
|
|
CHP-B1
|
Adapter Bushing, 1.5x12 to 1.0x14 ID
|
$70.00
|
|
|
CHP-HPC
|
Hydro-Press Custom Head Plate
|
$358.00
|
|
|
