World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
Gas Check Makers
Base Guard Kits
Jacket-Maker Sets, -H
Jacket Maker Kits, -S
Jacket Making Tools, -R
Tubing Cutter Saws
224 / 6mm Swaging Kits
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time

NOW IN STOCK FOR IMMEDIATE DELIVERY!


RF jacket maker, -R, 224
 
RF jacket maker, -R, 224 Quantity in Basket: None
Catalog No.: RFJM-22R
Price: $179.00
Shipping Weight: 1.00 pounds
 
  Spare 224 punch
  6mm (243) conversion punch
  6mm Knock-out rod
  No punch (die body only -$50)
 
Quantity:
 
RFJM-22R turns fired .22 LR cases into excellent thin-wall bullet jackets for .224 caliber bullets. The average weight range is from about 45 to 60 grains, depending on how much exposed lead or open tip one desires.

The jacket maker also works with .22 Short, .22 Long, and .22 Stinger cases, but not with .22 Magnum which is a thicker wall and may break the die if attempted. The fired and cleaned cases are pushed through the die, coming out the top with the rim unfolded and ironed smooth, and a .219-.220 diameter jacket resulting, in a .705 length for the .22 LR case.

Punches are eventually worn by the priming compound inside the rim area, and may be ground off if they develop a groove about 1/8 inch from the end. The symptom of a worn punch is that the rim does not iron smoothly, but leaves a ridge which can be detrimental to accuracy. Typical priming residue will wear the punch tip in from 5,000 to 10,000 rounds. Punch rods are replaceable. They screw into the base with a 6mm thread, if the base is held in a 3-jaw chuck while the rod is held and turned using a pin vise or drill chuck to secure it from slipping (pliers and similar methods of holding the parts will usually cause damage to the punch or base).


Related Item(s)
Code Name Price Availability  
BSD-224R 224 2-Die Swage Set $487.00  
CSL-2 Corbin Swage Lube, 2-oz $8.00  
RFJM-ROD Rod for 224 RFJM punch $6.00  





Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store