|
|
NOW IN STOCK FOR IMMEDIATE DELIVERY!
|
RF jacket maker, -R, 224
|
| |
|
Quantity in Basket:
None
Catalog No.: RFJM-22R
Price: $239.00
Shipping Weight: 1.00 pounds
|
| |
RFJM-22R turns fired .22 LR cases into excellent
thin-wall bullet jackets for .224 caliber bullets. The
average weight range is from about 45 to 60 grains,
depending on how much exposed lead or open tip one desires.
The jacket maker also works with .22 Short, .22 Long, and
.22 Stinger cases, but not with .22 Magnum which is a
thicker wall and may break the die if attempted. The fired
and cleaned cases are pushed through the die, coming out
the top with the rim unfolded and ironed smooth, and a
.219-.220 diameter jacket resulting, in a .705 length for
the .22 LR case.
Punches are eventually worn by the priming compound inside
the rim area, and may be ground off if they develop a groove
about 1/8 inch from the end. The symptom of a worn punch
is that the rim does not iron smoothly, but leaves a ridge
which can be detrimental to accuracy. Typical priming
residue will wear the punch tip in from 5,000 to 10,000
rounds. Punch rods are replaceable. They screw into the base
with a 6mm thread, if the base is held in a 3-jaw chuck
while the rod is held and turned using a pin vise or drill chuck
to secure it from slipping (pliers and similar methods of
holding the parts will usually cause damage to the punch
or base).
|
Related Item(s)
|
Code
|
Name
|
Price
|
Availability
|
|
|
BSD-224R
|
224 2-Die Swage Set
|
$620.00
|
Currently unavailable!
|
|
CSL-2
|
Corbin Swage Lube, 2-oz
|
$10.00
|
|
|
RFJM-ROD
|
Rod for 224 RFJM punch
|
$10.00
|
|
|
