Punch, for PRO-SWAGE die
	Quantity in Basket: None Catalog No.: PUNCH-RP Price: $90.00 Shipping Weight: 0.10 pounds
	Select Internal or External: Internal (base, inside the die) External (nose, fits the press ram) Enter actual diameter in inches: Nose Shape Pro-Swage Punch: None: select base shape Round nose 0.5-E (1/2-E) 3/4-E nose 1-E nose Keith nose Conical nose Button Nose Wadcuter Target Wadcutter AutoLoader nose Flat end punch Hollow Point, Lead Tip Hollow Point, Open Tip Weight Adjusting Hollow Point 3/4-E ogive (+$70) Hollow Point 1-E ogive (+$70) Hollow Point Keith nose (+$70) Base Punch for Pro-Swage die: None: select nose shape Flat Base internal Dish Base internal Cup Base internal Hollow Base internal Base Guard internal Rebated Boattail shape (lead only) Heel base (only if .015+ difference) +$70 Heel base diameter - if heel base checked: Heel base length - if heel base checked: Optional Note:   Knock-Out Rod (fits die top for ejection, $8)
	Quantity:
These are punches which work in the PRO-1-R Pro-Swage die, both the internal (fits inside the die) and the external (fits a standard reloading press ram with T-slot). They are similar to the punches for a CS-1-R die but not identical except for some of the external punches. A special punch called the weight adjusting punch is available to bleed off surplus weight and give you more precise control over the remaining bullet weight. First, select either Internal or External type of punch. Then, go to the options for the type you have selected, and choose the shape you want for that kind of punch. If you select INTERNAL and then leave the internal type unselected, we won't know what shape you want and will have to contact you to find out, or just send the most common option of a flat base internal. If you select EXTERNAL and leave the external shape unselected, we will need to contact you and find out what shape you wanted, or send the most commonly requrest type for the caliber you entered. Be sure to match the type and the shape.