Punch, type -R
	Quantity in Basket: None Catalog No.: PUNCH-R Price: $90.00 Shipping Weight: 0.10 pounds
	Enter actual diameter in inches: Enter bullet caliber (diameter) in inches: Select type of punch: Internal (stays in the die) External (pushes components into the die) Select die the punch fits: Core swage (CSW) Core seater (CS) Point former (PF) Lead tip shaper (LT) Bullet reducing die (BRD) Jacket reducing die (JRD) Pro-Swage Other (describe below) Punch Shape: Open Tip (fits jacket ID) Lead Tip (fits die bore) Flat Base Target Wadcutter Button-Nose Wadcutter 3/4-E round nose 1-E round nose Keith TC nose Conical nose Auto Loader Hollow Point, Lead Tip Hollow Point, Open Tip Dish Base Cup Base Hollow Base Base Guard base Ejection pin wire FMJ base turning (PF) Add HP to selected shape (+$70) Tip Closing (LT int hardened, +$70) Enter shape under "notes" Description (optional):
	Quantity:
Select the appropriate type (internal or external), the kind of die it fits, and then, depending on the die, select the characteristics such as ogive or base shape. Note that custom shapes and sizes are an additional $70.   A hollow point combined with a nose shape like Keith or 3/4-E is a more complex design with a good deal more machine work than either kind by itself, so it is priced as a custom punch for that reason. The picture shows (left to right): Internal punch, for CSW, CS, or LT die. Internal punch, with spring, for PF die. External punch, for CSW, CS, PF, or LT die. External punch for jacket draw die. External punch for bullet reducing die. See punch images and descriptions on www.Corbins.com/punches.htm for details. Although the PRO-1-R Pro-Swage die uses similar punches, there are some variations such as weight adjusting punches, and some restrictions. Please order the -R type punches for your PRO-SWAGE die using the PUNCH-RP listing (PUNCH-R, Proswage type). They are usually interchangeable but it is less confusing to order from the pre-filtered, appropriate selection shown there.