Lead Semi-Wadcutter Die, type -S
	Quantity in Basket: None Catalog No.: LSWC-1-S Price: $239.00 Shipping Weight: 1.00 pounds Sorry, we are no longer taking orders for the Lead Semi-Wadcutter Die, type -S on our legacy website. Please visit our new website at Corbins.com for all future orders. Any question/concerns you can reach us at sales@corbins.com Thank you
	Enter actual diameter in inches: Nose shape (ext.): Flat Target Wadcutter Button Nose Wadcutter Conical SWC Keith Nose SWC Auto-Loader 1/2-E Round Nose 3/4-E SWC 1-E SWC 1-E Flat Tip SWC Custom nose shape ($70) describe/note Enter custom nose specs (if selected above):   Add Hollow Point to selected shape ($70) Select Base Shape:(Int.): Flat Base Dish Base Cup Base Hollow Base Rebated Boattail Base Base Guard(TM) Base Custom Base If checked, describe custom base: Optional Note:
LSWC-1-S is a single die set with internal and external punch, having a straight bore and three bleed holes for weight adjustment. It can be used with soft lead up to Bhn 8-10 depending on the shape and caliber. The nose and the base are both formed by pressing against the end of a punch. The die set is used to make flat, cup, or hollow base lead bullets, gas checked or Base Guard base bullets, or half jacketed bullets if the jacket does not cover the position of the bleed holes in the die. The nose can be any SWC style (Keith, Button Wadcutter, Target Wadcutter, 3/4-E round nose, 1-E round nose, Conical, or any custom shape). The SWC styles always have a small shoulder, or step, between the end of the full-bore shank and the start of the nose. LSWC-1-S dies are used for handgun bullets, or for hollow based or cup base lead paper-patched rifle bullets. If you order for paper patch use, be sure to specify a bullet diameter that will work in your barrel after you add the paper! A .45-70 caliber, for example, might use a .458 diameter swaged bullet for a lead bullet that is to be dip or spray lubed, but it might be more likely to use a .448 diameter for use with .0025 inch thick paper patch in the same gun. You can add different nose and base punches to change the nose or base shapes in the same die. Shapes from left to right: TWC (target wadcutter), BWC (button nose wadcutter), Conical, Keith, AL (auto-loader), 3/4-E, and 1-E. Note: If you want custom bleed hole sizes, non-standard diameters, special punch shapes, or other features that are not "off the shelf" standards, please order the LSWC-1-SC custom die instead. It allows for various custom features.

Related Item(s)

Code	Name	Price	Availability
PUNCH-S	Standard punch, type -S	$70.00	Check at Corbins.com
CSL-2	Corbin Swage Lube, 2-oz	$10.00	Check at Corbins.com
CSL-16	Corbin Swage Lube, 16-oz	$55.00	Check at Corbins.com
LW-10	Lead Wire, 70,000 gr. spool	$66.00	Check at Corbins.com
LW-10S	Lead Wire, 10-lb., 0.1-in diam.	$66.00	Check at Corbins.com
LW-40	Lead Wire, 4 spools (net 40lb)	$237.60	Check at Corbins.com
LW-40S	Lead Wire, 40-lb, 0.1-inch	$237.60	Check at Corbins.com
PCS-1	Precision Core Cutter	$100.00	Check at Corbins.com
PCS-2	Magnum Core Cutter	$143.00	Check at Corbins.com
BGK-1-S	Base Guard Maker Kit, type -S	$287.00	Check at Corbins.com
GCM-1-S	Gas Check Maker, type -S	$549.00	Check at Corbins.com
LSWC-1-SC	Lead Semi-Wadcutter Custom -S Die	$323.00	Check at Corbins.com
PUNCH-SE	Punch Head Extension, -S	$12.50	Check at Corbins.com