Jacketed Semi-Wadcutter Set, type -H
	Quantity in Basket: None Catalog No.: JSWC-2-H Price: $598.00 Shipping Weight: 2.00 pounds Sorry, we are no longer taking orders for the Jacketed Semi-Wadcutter Set, type -H on our legacy website. Please visit our new website at Corbins.com for all future orders. Any question/concerns you can reach us at sales@corbins.com Thank you
	Enter actual diameter in inches: Select Shape / Punch end (if applicable) for LSWC or CS punch: Not applicable Flat Target Wadcutter Button Nose Wadcutter Conical SWC Truncated cone (similar to Keith) Keith Nose SWC Auto-Loader 1/2-E round nose 3/4-E SWC 1-E SWC 1-E Flat Tip SWC Custom nose shape ($84) describe/note Enter custom nose specs (if selected above):   Add Hollow Point to selected shape ($84) Select Base Shape: Flat Base Dish Base Cup Base Hollow Base Rebated Boattail Base Base Guard(TM) Base Heel Base (must be at least .015 under caliber) Custom Base +$84 Heel base diameter (if heel base selected): Heel base length (if heel base selected): If checked, describe custom base:
JSWC-2-H jacketed SWC 2-die set consists of a CSW-1-H core swage die, and a CS-1-H core seating die. The core seater is typically fitted with a pistol style nose punch (external) and a flat, dish, cup, or hollow base internal punch. Use this as a way to make 3/4-jacket bullets where the nose is made of lead and the shank starts with the jacket. The jacket cannot be forced into the nose area because the punch edge would crush the jacket. Use a 3-die set to make bullets where the jacket flows into the nose area.