World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
Gas Check Makers
Base Guard Kits
Jacket-Maker Sets, -H
Jacket Maker Kits, -S
Jacket Making Tools, -R
Tubing Cutter Saws
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Jacket Reducing Die Set, Deep Draw
 
Jacket Reducing Die Set, Deep Draw Quantity in Basket: None
Catalog No.: JRD-2-H
Price: $775.00
Shipping Weight: 2.00 pounds
 
Starting Diameter:
Final Diameter:
Wall Thickness:
Special notes (optional):
 
Quantity:
 
JRD-2-H commercial jacket reducing die is designed with a pre-alignment guide or "nest" section, and a punch which screws into a 5/8-24 threaded adapter, which in turn fits the 1-inch x 12 threaded press ram. The punch is made from specially hardened alloy steel to withstand pressures high enough to thin the jacket walls during the reduction.

The JRD-2-H design provides a higher level of wall concentricity than the JRD-1-H draw die, and is preferred for heavy duty drawing in commercial operations. It is required when the jacket wall needs to be reduced in thickness, as well as making the diameter smaller. A jacket stripper plate is also provided, which can be manually used or attached to an automatic jacket stripper device for use on the Hydro Press. The plate slides a key-hole opening over the emerging jacket, then slides a precise narrow section of the hole under the jacket with the punch extending the jacket mouth above the die top (top of stroke). On the down stroke, the plate strips the jacket off the punch. The JSP-H stripper plate is made specifically for the diameter of jacket after drawing, and for the wall thickness of the jacket.

Samples jackets are required for drawing, in order to design the proper punch diameter and tip curvature, nest dimensions and bore diameter.


Related Item(s)
Code Name Price Availability  
JRD-2-HD Jacket Reducing Die Body only $347.00  
CHP-S2H Ram Adapter, 5/8-24 to 1-12 $59.00  



EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store