Hex Nut, to hold 5/8-24 punch in FPH-1-H
	Quantity in Basket: None Catalog No.: FPH-S2H Price: $35.00 Shipping Weight: 0.20 pounds
	Quantity:
This adapter bushing looks like the standard FPH-1HH hex retainer bushing, which holds the top or external punch in the FPH-1-H floating punch holder for swaging. The difference is the internal threaded hole, which is 5/8-24 to accept either the APA-2-S arbor press anvil (one of the 2 in the kit), or the ET-2-S trim punch for the trim die (or any other special 5/8-24 threaded punch that can be used in the top of the press rather than in the press ram). The FPH-S2H adapter is part of both the ET-2-H trim set and the APA-2-H arbor press kit. It does not need to be purchased separately unless for replacement of a lost part or for some other special purpose. The ET-2KIT consists of this hex retainer plus a 1.0-12 to 5/8-24 ram adapter. These two parts can be purchased as a kit, or you can order the individual components. Again, this is not required if you order the APA-2-H arbor press kit or the ET-2-H trim die set, since the kit is already included.