|
Replacement Ejection Pins, -S, Pkg/5
|
|
|
Quantity in Basket:
None
Catalog No.: EJECT-S
Price: $12.00
Shipping Weight: 0.20 pounds
|
|
Eject-S is the catalog code for a package of five
spring wire ejection pin replacements, for type -S internal
point form punches.
PLEASE NOTE:
These ejection wires are NOT synchronized ejector punch replacements for inserting metal tips or for weight-adjusting PF-1-SB type dies! These are simple spring wire ejectors that are used for standard open tip point forming die. If you need a metal tip ejector insert, please order the PUNCH-SI instead.
The ejection pin wires come in sizes that fit your point
form die, ranging from .049 to .250 diameter.
Important:
The diameter
of your ejection pin is stamped on the end of the die,
as a 3-digit fraction such as .081 or .120. The same
number is etched into the head of the punch. Make sure
you specify the same number as that marked on the punch
in order to get the proper size wire.
The markings on the end of your point form die will be a "P" for point form die, the caliber such as .243 or .308, and ogive shape such as 6-S or 3/4-E, and the ejection pin size such as .081 or .102. Almost every single fact about your die is found in these marks, etched in the end of the die body.
The only things left are the shape of the base punch (flat, cup, dish, hollow, RBT, and so forth) and the depth or length of die die cavity, which is usually not necessary for replacement parts.
|
|