|
Handle Retainer Clip, for S-Press
|
|
|
Quantity in Basket:
None
Catalog No.: CSP-1C
Price: $19.50
Shipping Weight: 0.25 pounds
|
|
This is the retainer clip which snaps around the ram of
the S-press (CSP-1) to hold the handle upright in the
"ram down" storage or resting position. It comes with the
press, installed, and is offered as a replacement or repair
item for the S-press. A tapped hole on the toggle block
provides the center mounting position.
Older Series II presses, or any CSP-1 model which did not
originally have the retainer clip feature installed, has
no mounting hole on the toggle. To add the feature to
older presses, Corbin makes a retro-fit kit which requires no machine
work or modifications to the press. This is a CSP-1CR (for
clip, retrofit) model number. It can be used on any of
the vertical CSP-1 press versions. A bracket fits between
the handle and the toggle bar to mount the bracket.
If you wish to put the handle retainer on an earlier press,
order the retrofit version. For replacement on a more
current press, order the standard version.
Note that the clip can be mounted either on a left or right
hand positioned handle, by turning the spring clip portion
around and mounting it on either side of the bracket as
shown in the dual photo below.
|
|