|
CSP-1 Ram Guard Sleeve
|
|
|
Quantity in Basket:
None
Catalog No.: CSP-1-RG
Price: $6.50
Shipping Weight: 0.10 pounds
|
|
This is a steel sleeve which slips over the ram of the
CSP-1 press, and prevents lead extrusions and other debris
from dropping into the ram slot.
The sleeve sits on the press base, while the ram moves freely
up and down through it. Lead wire bits which are extruded
from a core swage die or from a lead semi-wadcutter die can
drop down to the press base and roll into the slot on the
side of the ram, when the ram is up. With the sleeve in
place, the bits are blocked. This is a handy option to use
with long runs of LSWC bullets or core swaging.
The ram guard sleeve is not used when the press is in the
reloading mode. Instead, spent primers are caught in the
CSP-1T primer catcher tray.
|
|