World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
S-Press
H-Press
H-Press Accessories
Bullet Swage Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


CHP-1 Electronic Timer Module (1 of 2)
 
CHP-1 Electronic Timer Module (1 of 2) Quantity in Basket: None
Catalog No.: CHP-TIME
Price: $179.00
Shipping Weight: 0.50 pounds
 
Optional Note:
 
Quantity:
 
This is the electronic timer module for the Hydro-Press ram dwell timing control. There are two in later model presses and one in the earlier models. The module has a plug-in socket wired into the press circuit which pulls gently off the octal (8-pin) base of the module.

The timer module is a double pole/double throw relay with an adjustable time delay, set by the dial knob on top. The range can be set by means of a screw marked "mode" which changes the dial face numbering for different time amounts. Generally the default range of 0 to 1.2 minutes is the most useful one.

The timer body snaps into a square plastic retainer, and is held in the press cabinet by this retainer. It is possible to gently lift two tabs projecting down from the retainer which engage a series of parallel grooves in the side of the module, and then pull the module straight up and out of the press from the top (or push it up from the bottom). The octal plug has to be removed first, of course.

A timer failure could cause the press to show that it is always waiting to go up, or go down, according to the indicator lights, without ever doing so. This would be the most common failure mode. Be sure to test the module by setting it to zero, and then trying to make the ram go up or down. Sometimes the timer is accidentaly set too high, and is actually working just fine but the ram does not move for an excessive length of time, making the operator think it will never move.

The dwell timers are not difficult to remove, but the power should always be disconnected before working inside the cabinet.




EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store