World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


CHP-1 Knock-Out Bar
 
CHP-1 Knock-Out Bar Quantity in Basket: None
Catalog No.: CHP-KO
Price: $12.00
Shipping Weight: 0.25 pounds
 
 
Quantity:
 
The CHP-1 Hydro-Press uses a hardened knock-out bar to stop the movement of the downward-moving internal punch as the ram continues down, ejecting the bullet from the die.

This is a spare K.O. bar for the CHP-1 press. It is a good idea to have a spare, in case the one which comes with your press is misplaced. The K.O. bar can be bent or damaged if the bottom position sensor is adjusted too low to stop the ram movement before stressing the K.O. bar, provided the drive pressure is also set to a very high level.

Unlike the k.o. bar set for the CSP-2 press, only one height of bar is needed. This is because the Hydro-press can be adjusted for any top and bottom of stroke position, whereas a mechanical press has a fixed top and bottom of stroke. To adjust for different lengths of dies and punches, different heights of k.o. bars are used in the hand press. In the hydraulic press, the sensor is simply moved to establish a desired top and bottom position for the stroke.

The Solution to Broken KO Bars:

Set the bottom sensor higher, so that the ram stops pushing down BEFORE the internal punch jams between the KO bar and the bottom end of the die. If you set the ram to stop before the internal punch head smacks into the bottom of the die, then the only force on the KO bar is whatever it takes to push the bullet out of the die. The full force of the press will NOT be applied to the middle of the KO bar and it won't break.

Conversely, if you DO set the bottom sensor just a tiny bit lower than that, you probably will keep breaking the KO bars. If the bullet won't eject all the way, you can always send the die back with a note saying so, and we can relieve the die opening with a larger funnel or bevel, or even take a light cut off the face of the die to shorten it slightly.

Usually the reason people break the KO bar by setting the bottom stop sensor too low is an attempt to get the bullet to eject further out of the die. It won't work. It just breaks the KO bar. Of course, that's a great way to sell lots of KO Bars, so if it's fun to set the sensor that low and hear the bar snap, carry on! Maybe we can do a special on bushel baskets of KO Bars!

Otherwise, we can modify the die slightly and get better ejection at a slightly higher position of the ram. We are only talking about fractions of an inch for easy ejection versus sticking in the end of the die just short of ejection. That could just be normal compression tolerances adding up over time, if the die used to eject fine and now it is just not quite doing it. Easy fix, though.

Caution: Don't try to machine the face of the die yourself in a lathe with regular tool bits. Those dies are EXTREMELY hard and tough. A ceramic tool bit is called for along with proper coolant. Grinding the face of the die requires proper coolant also, because the die temper is adjusted for good wear and shock resistance. Heating it will upset the proper temper. If you are experienced at tool and cutter grinding and know how to keep the workpiece from overheating, fine. Otherwise don't risk ruining your die when it's easy to send it back with the punches so we can test everything together.





EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store