World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Swage Dies, type -R
Swage Dies,  type -S
Swage Dies, type -H
Bullet Swage Sets, -H
Draw Dies, -H
Punch, type -H
Specialty Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Adj. punch, type -H (> .375)
 
Adj.  punch, type -H  (> .375) Quantity in Basket: None
Catalog No.: PUNCH-HL
Price: $349.00
Shipping Weight: 0.50 pounds
 
Select type of punch:
Internal (stays in the die)
External (pushes components into the die)
Select die the punch fits:
Core swage (CSW)
Core seater (CS)
Boattail preform (BT-1)
RBT forming (BT-2)
Point former (PF)
Lead tip shaper (LT)
Tubing JM End Rounding
Bullet reducing die (BRD)
Jacket reducing die (JRD)
Other (describe below)
Caliber (final size):
Punch diameter if known:
Description (optional):
 
Quantity:
 
The PUNCH-HL is an adjustable punch made for calibers over .375-in, which requires special internal construction to fit the punch holder of the CSP-2 and CHP-1 presses.

These punches are most often used for the JM-1-H copper tubing jacket maker, or as external punches with the CS-1-H or RBT-2 (BT-1 and BT-2 dies) set for seating cores with larger diameter jackets of various lengths. The function of the adjustable shouldered punch is to stop forward flow of the jacket material under seating pressure, which is most useful when seating cores in tubing jackets and certain thick walled jackets where the material tries to extrude as the core is seated. This can cause separation of the jacket at a RBT junction and variation in the length of the jacket after seating.

The adjustable sleeve on the punch creates a shoulder or stop against which the end of the jacket will bear, preventing it from extruding forward and solving the problem. Not all jackets do this. Most of the harder drawn commercial jackets do not, but whenever a problem with separation and forward flow takes place, this punch is often the best solution.




EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store