World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Swage Dies, type -R
Swage Dies,  type -S
Swage Dies, type -H
Bullet Swage Sets, -H
Draw Dies, -H
Punch, type -H
Specialty Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Jacket Stripper Plate, -H
 
Jacket Stripper Plate, -H Quantity in Basket: None
Catalog No.: JSP-H
Price: $25.00
Shipping Weight: 0.25 pounds
 
Starting Diameter:
Final Diameter:
Wall Thickness:
Special notes (optional):
 
Quantity:
 
This is a stripper plate for the JRD-2-H jacket draw die. It has a key-hole shaped slot and fits over the top of the draw die. The jacket passes up through the larger end of the hole, then the plate is moved so that the narrow end is under the jacket mouth, at the top of the stroke.

On the down stroke, the jacket mouth contacts this hardened plate and is stopped, while the punch continues down. This removes the jacket cleanly from the punch. The stripper plate can be operated by hand, or it can be run automatically by the Corbin automatic jacket stripper kit on the CHP-1 Hydro Press (optional accessory).

The stripper plates are supported by two stripper pins, which slip into holes in the top of the CSP-2 Mega Mite press, or the top of the CHP-1 Hydro Press. The stripper pins work with all sizes of stripper plates, so only one set is needed regardless of the number of draw dies in use.

There are two necessary dimensions to make this plate. One is the jacket wall thickness (marked on the drawing punch). The other is the caliber or OD of the drawn jacket. It doesn't hurt to have the original size but it doesn't really affect the dimensions of the stripper plate. The keyhole slot has to just clear the punch OD on the down stroke, so it strips off the jacket. The big end of the keyhole has to easily clear the OD of the drawn jacket. If we have the jacket wall thickness, we can size the slot just right for the punch by subtracting it x 2 from the jacket OD. Or if we have the punch OD, and jacket OD, we can also make the slot and clearance hole work properly with that jacket.

The pins are sold separately. A pair of pins is needed for a stripper plate, one for each end. The pins fit through slots on both ends of the plate, allowing it to be easily moved a short distances for clearing the jacket and then pulling it off the punch.

See JSP-P listing for pins.


Related Item(s)
Code Name Price Availability  
JSP-P Jacket Striper Plate support Pin $2.50  
JRD-2-H Jacket Reducing Die Set, Deep Draw $645.00  
JRD-2-HD Jacket Reducing Die Body only $289.00  
JRD-2-HH Reducing Die Holder, -H (with snap ring) $69.50  
JRD-2-HP Jacket Reducing Punch, deep draw -H type $189.00  
JRD-2-HK JRD-2-H Punch/Guide/Stripper kit $398.00  



EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store