World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Search the store:

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time

Corbin Tip Inserts Corbin's ULD Bullet Tips increase the BC of the already ultra-low-drag secant ogive, rebated boattail ULD bullet design, in calibers from .284 to .458 (using TIP-30) and calibers from .458 to .510 (using TIP-50). Available in packages of 500, the ULD tip inserts are installed using the PF-1-ST or PF-1-HT point forming and tip inserting die (which replaces the standard PF-1 point former when making high BC ULD tip bullets)

Corbin PIN-POINT tip inserts with 25-degree nose cone make high BC bullets practical in cartridges with limited OAL, as well as airgun pellets, muzzle loader slugs, saboted lead bullets and big bore handguns. In a range of 9mm to .510 caliber, the PIN-POINT insert used with a PIN-POINT ogive PF-1-ST or PF-1-HT die set provides low drag, and impressive terminal ballistics. Typical ogive shape for 45 and up is aproximagely 4-S.

The ogive curve is adjusted for a smooth transition, in the 2-S to 3-S range for smaller diameter bullets. Exact ogive depends on caliber and is determined by the arc angle required to match the 25-degree conical section at the diameter of the insert conical base. The ogive cannot be randomly selected, nor the tip inserted into various ogives, without causing an abrupt change in the combined ogive shape. Each caliber is engineered specifically for best ogive curve.
TIP-30
Drawing of TIP-30
TIP-50
Drawing of TIP-50
PIN-POINT insert
TIP-30 SPECIFICATIONS:
  • OAL .715-in
  • Base of cone diameter .209-in
  • Stem diameter .100-in
  • Cone length .435-in
  • Stem length .280-in
  • Cone angle 14-deg.
  • Wt. 14.5 grains
TIP-50 SPECIFICATIONS:
  • OAL .812-in
  • Base of cone diameter .260-in
  • Stem diameter .110-in
  • Cone length .500-in
  • Stem length .312-in
  • Cone angle 14-deg.
  • Wt. 24.2 grains
TIP-45 SPECIFICATIONS:
  • OAL .495-in
  • Base of cone diameter .210-in
  • Stem diameter .100-in
  • Cone length .235-in
  • Stem length .270-in
  • Cone angle 25-deg.
  • Wt. 9.2 grains



Bullet Tips



ULD Tips, size 30, pk/500 ULD Tips, size 30, pk/500
Code: TIP-30-5
Price: $120.00
Quantity in Basket: none
 



ULD Tips, size 50, pkg/500 ULD Tips, size 50, pkg/500
Code: TIP-50-5
Price: $130.00
Quantity in Basket: none
 



PIN POINT tips, pkg/500 PIN POINT tips, pkg/500
Code: TIP-45-5
Price: $125.00
Quantity in Basket: none
 



Point Form/Tip Seater, -S Point Form/Tip Seater, -S
Code: PF-1-ST
Price: $439.00
Quantity in Basket: none
 



Tip Seat/ Point Former, -H Tip Seat/ Point Former, -H
Code: PF-1-HT
Price: $610.00
Quantity in Basket: none
 



Punch, Internal PF for tip seating, -S Punch, Internal PF for tip seating, -S
Code: PUNCH-ST
Price: $84.00
Quantity in Basket: none
 



Internal punch for TIP seating/ point form dies Internal punch for TIP seating/ point form dies
Code: PUNCH-HT
Price: $84.00
Quantity in Basket: none
 



Internal Punch rod insert for tip-seat/ PF die Internal Punch rod insert for tip-seat/ PF die
Code: PUNCH-HI
Price: $55.00
Quantity in Basket: none
 



Rod insert for S-type Internal Punch Rod insert for S-type Internal Punch
Code: PUNCH-SI
Price: $55.00
Quantity in Basket: none
 



Note
Clients often ask if we can make a different or special shape of tip, make tips for smaller calibers or make it of a different metal such as aluminum or brass, etc. We can and have made the tips from other metals, but softer metals cause problems with deformation, lower accuracy due to bending and deflection both in production at high speed and in handling and swaging, recoil in magazine rifles, etc. The 41L42 zinc plated tips have proven better for accuracy and production quality. It's a case of "been there, done that." It didn't work nearly so well as what we are using now.

Making smaller tips for calibers under .284 diameter presents a cost problem. Yes, it can be done. But the problem is that the high speed CNC production that maintains good cost and still has fine tolerance control with larger tips fails with smaller ones due to deflection from cutting pressure. Changing to a Swiss-type screw machine solves this issue, but the speed of production drops, so that the cost per part soars. As with many ideas, it can be done but you wouldn't want to pay what it costs to do it to the necessary precision once the diameter drops below what we found works well.

As to making different angles, sizes, special runs, even with large enough diameters to use CNC turning centers, the minimum production run that will keep the cost per part anywhere near a reasonable level is 100,000 parts. Any smaller runs divide the set-up, programming, metal purchase and shipping, labor and machine time costs by too small a number to give you a good price per part. So yes, it can be done. Yes, we can take a special order for your custom tips made of whatever you wish. But the cost per part will necessarily be far higher than our optimized cost standard parts, and the minimum quantity will be at least 100,000 parts. (Or you can have one part for the same price! Overhead is the same to get to that point.)

There are still a few folks who will present endless arguments proposing how it should be possible to make them cheaper, in less quantity, out of Unobtainium Alloy, etc. We already know from experience what works both technically and economically, which is why we offer what we do now. So to save time for everyone, if you still insist that you can get a different design using another material in less quantity for lower cost, the bottom line is to please ask a CNC machine job shop for a quote. If they can do it for the price and in the quantity and quality you find acceptable, you won the lottery! We'd be happy for you. If you find it can't be done, we are still here with a design that works and can be purchased in lots of 500 or more.




EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store