Hex Nut, to hold 5/8-24 punch in FPH-1-H
Quantity in Basket:
Catalog No.: FPH-S2H
Shipping Weight: 0.20 pounds
This adapter bushing looks like the standard FPH-1HH hex retainer
bushing, which holds the top or external punch in the FPH-1-H
floating punch holder for swaging. The difference is the
internal threaded hole, which is 5/8-24 to accept either the
APA-2-S arbor press anvil (one of the 2 in the kit), or the
ET-2-S trim punch for the trim die (or any other special
5/8-24 threaded punch that can be used in the top of the
press rather than in the press ram).
The FPH-S2H adapter is part of both the ET-2-H trim set
and the APA-2-H arbor press kit. It does not need to be
purchased separately unless for replacement of a lost part
or for some other special purpose. The ET-2KIT consists
of this hex retainer plus a 1.0-12 to 5/8-24 ram adapter.
These two parts can be purchased as a kit, or you can order
the individual components. Again, this is not required if
you order the APA-2-H arbor press kit or the ET-2-H trim
die set, since the kit is already included.