World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Base Plate Bushing, for CHP-1 Press
 
Base Plate Bushing, for CHP-1 Press Quantity in Basket: None
Catalog No.: CHP-BPB
Price: $14.50
Shipping Weight: 1.00 pounds
 
Optional Note:
 
Quantity:
 
This is the sintered bronze base plate bushing (bearing against the ram) for the CHP-1 Hydro Press. It is 1-1/2 inch ID, and 1-3/4 inch OD, with a 3/4-inch length. It is an "Oilite" sintered bushing (SS4846-12) and is normally kept in stock for replacement purposes, although replacement is extremely rare since there is little or no side loading on the ram.

To remove and re-install the bushing, make a mild steel, polycarbonate or brass tool that is a two diameter cylinder four to six inches long, with a small diameter to fit inside the bushing closely, and the larger diameter just slightly smaller than the OD of the bushing. This can be used to drive the old bushing out, and to press the new bearing in. Do not drive the bushing in with a mallet or hammer alone, since thiw is likely to damage the bushing. Only one bushing is required per press.




EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store