World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Core Cutter Dies (pair), for PCS-2
 
Core Cutter Dies (pair), for PCS-2 Quantity in Basket: None
Catalog No.: PCS-2D
Price: $20.00
Shipping Weight: 0.50 pounds
 
Select wire size:
 
Quantity:
 
PCS-2D Magnum Core Cutter die inserts come in pairs of the same size and height. They fit the PCS-2 Magnum Core Cutter (one comes with the tool, others are optional).

The dies fit into the top and bottom bars of the tool. To remove a die, loosen the set screw holding it in the bar. Then, if the die will not come out by finger pressure, open the tool so you can place an old cartridge or a piece of brass rod or tubing on the die, and tap it with a hammer to drive the die out of the tool frame.

To install a new die, open the tool just slightly, so that the die cannot slip past one bar into the hole in the next bar. Align the die, make sure that the set screw is out of the way, and press the die in with your fingers. If the die fits too snugly to press in by hand, use an old cartridge case (unprimed!) and a mallet or small hammer to tap the die into place. Usually the dies will go in and out by mild finger pressure.


Related Item(s)
Code Name Price Availability  
LW-10 Lead Wire, 70,000 gr. spool $50.00  
LW-40 Lead Wire, 40-lb Carton $180.00  
PCS-2 Magnum Core Cutter $98.00  
PCS-2DC Custom Die for PCS-2 $45.00  





Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store