Jacketed Semi-Wadcutter set, type -S
	Quantity in Basket: None Catalog No.: JSWC-2-S Price: $478.00 Shipping Weight: 2.00 pounds
	Enter actual diameter in inches: Select Shape / Punch end (if applicable) for LSWC or CS punch: Not applicable Flat Target Wadcutter Button Nose Wadcutter Conical SWC Truncated cone (similar to Keith) Keith Nose SWC Auto-Loader 1/2-E round nose 3/4-E SWC 1-E SWC 1-E Flat Tip SWC Custom nose shape ($84) describe/note Enter custom nose specs (if selected above):   Add Hollow Point to selected shape ($84) Select Base Shape: Flat Base Dish Base Cup Base Hollow Base Rebated Boattail Base Base Guard(TM) Base Heel Base (must be at least .015 under caliber) Custom Base +$84 Heel base diameter (if heel base selected): Heel base length (if heel base selected): If checked, describe custom base:
	Quantity:
The JSWC-2-S jacketed semi-wadcutter 2-die set is used to make either lead or jacketed SWC style bullets. The SWC designation indicates a bullet with a lead nose formed against the end of a movable punch. The actual shape can be anything that is a reverse of the punch itself, from flat to cupped, round nose to Keith style. For handguns, the most typical nose shape is either Keith (a truncated conical design) or 3/4-E round nose. Other standard shapes include conical, button-nose wadcutter, and target wadcutter. Base shapes with jacketed bullets can be flat, dish, or cup, but generally a hollow base punch is only used with lead (since it would tend to penetrate the jacket by stretching it too far). Custom shapes can also be ordered for an additional cost. Although the JSWC-2-S set can be used for lead bullets, it is generally more efficient (faster) to make lead bullets in the LSWC-1-S die, which combines both the weight adjusting core swage bleed holes with the final diameter of the core seater die. The JSWC-2-S die set can make more nearly perfect shapes because weight control and shape control are done in separate dies, allowing for more pressure as required in the second stroke. From left to right: TWC (target wadcutter), BWC (button nose wadcutter), conical, Keith, Auto-Loader (AL), 3/4-E ogive, and 1-E ogive.

Related Item(s)

Code	Name	Price	Availability
LSWC-1-S	Lead Semi-Wadcutter Die, type -S	$239.00
FJFB-3-S	Full Jacket FB set, type -S	$775.00
CSW-1-S	Core Swage Die, type -S	$239.00
CS-1-S	Core Seating Die, type -S	$199.00