World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Swage Dies, type -R
Swage Dies,  type -S
Swage Dies, type -H
Bullet Swage Sets, -H
Draw Dies, -H
Punch, type -H
Specialty Dies
Jacket Maker Sets
224 / 6mm Swaging Kits
Airgun Swages
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Replacement Ejection Pins, -H, pk/5
 
Replacement Ejection Pins, -H, pk/5 Quantity in Basket: None
Catalog No.: EJECT-H
Price: $12.00
Shipping Weight: 0.20 pounds
 
Select wire diameter:
Use standard size for caliber
.047-in
.062-in
.072-in
.081-in
.091-in
.105-in
.120-in
.134-in
Other, custom made ($175 or $35/ea)
Enter custom size if checked:
Please select the die length for this pin:
2-1/2 inch die body length
3-inch die body length
Custom length, use "Note" to specify.
Optional Note:
 
Quantity:
 
EJECT-H is the catalog number for ejection pin set of 5 replacement wires for your internal punch, for the -H type point form die.

PLEASE NOTE:
These are NOT metal tip seating ejectors or synchronized bleed-hole point form die ejectors! They are simple spring wire replacements for a conventional PF-1-H open tip point forming die. If you need a replacement synchronized punch for your PF-1-HT, PF-1-HB, or similar point former with a .157 or larger synchronized ejection pin, then please order the PUNCH-HI instead. These wire pins are not the same thing and will not work for that kind of die...

Select the diameter that is marked on the end of your die, or on the head of the punch. This will be a decimal number from .049 to .134 inch diameter, in most cases. The ejection pins are held in the punch head with a set screw.

For a chart of standard ejection pin sizes, see Corbins.com/pinsizes.htm

Ejection pins are made of an alloy steel with heat treatment specific to end loading resistance. They are not suitable for use as side-loaded components. Do not order them instead of the retraction pin, for example, or for use as cross pins for other purposes. Also, they are protected within the ram and die body when being used normally, and acquire swage lube from operating conditions, which helps protect the metal from rust and corrosion. The CHP-PIN is made of stainless steel heat treated for resistance to bending, with a polished and ground finish. It is more resistant to corrosion and rust without protection, which is good because it is handled and pushed into and out of the ram slot when changing internal punches, which in turn pushes lubricant off and exposes the surface to the atmosphere. In short, the components are designed and built to do specific jobs, with many details taken into consideration. Using the right component is essential for proper operation and longer tool life.




EXPORT RESTRICTIONS: We can ONLY ship to USA locations, Canada, or the UK at this time!
Note: 3.5% Bank Card Processing Fee added by Card Processing Service. VCC Number is required for security: send by email with order number.
Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store