World Leader in Bullet Swaging Technology
Store Front Account Search Product List Basket Contents Checkout
Sign In (optional)

Choose a category...

Specials
Presses
Bullet Swage Dies
Jacket Maker Sets
Gas Check Makers
Base Guard Kits
Jacket-Maker Sets, -H
Jacket Maker Kits, -S
Jacket Making Tools, -R
Tubing Cutter Saws
224 / 6mm Swaging Kits
50 BMG Tools
Books, Print Editions
Software
Ballistic Test Media
Bullet Tips
Bullet Balls (Polymer)
Bullet Jackets
Chemical Products
Copper Strip/Tube
Lead Wire
Lead Wire Extruders
Core Cutters
Core Moulds
Powder Metal Funnel
Cannelure Tools
Bullet Pullers
Sportswear
Heat Treatment


Delivery Time


Cartridge to Jacket Converter Die
 
Cartridge to Jacket Converter Die Quantity in Basket: None
Catalog No.: C2J-1-H
Price: $277.00
Shipping Weight: 2.00 pounds
 
Select cartridge case:
Enter jacket caliber:
Optional Note:
 
Quantity:
 
The Cartridge to Jacket die converts fired centerfire pistols cases, such as the 9mm, into short and medium length rifle jackets as small in caliber as .308.

Other conversions which can be ordered are:
  • 45 ACP to .429, .423, .416, .412, .410, .400, or .375
  • 40 S&W to .375, .358, .351, .348 or .338
  • 380 ACP to .338, .312, .311, or .308
  • 32 ACP to .310, .308, .284, .277, .257 or .264
The cartridge case must be deprimed and annealed (heated to a faint red glow), then allowed to cool. It is then pushed through the draw die.

The "default" size is 9mm to .308. If you don't enter any other information, this is what you will get.

Important:
If you select a combination of starting cartridge size and ending jacket size that will not work, it will be necessary to cancel or add to the order. Additional JRD-1-H draw dies may be needed to reduce the case further than the limits imposed by a single draw. The above list gives you an idea of what is possible. If you order a combination such as .45 ACP to .224, the order will be invalid. This is too far to reduce the case. If you order a combination such as .40 S&W to .308, it may be possible but would require an additional drawing die, listed separately, at additional cost.

If a certain combination is not practical, you will be contacted shortly after you order it, and asked if you want to add other draw dies or cancel the order. You will not be charged for or sent any combination that does not work. Some combinations may not have been tested yet, but if this is the case, and they turn out to be impractical without further tooling, we will assume the cost of discovering this and will let you know as soon as we do if it doesn't work. Some combinations may work with less effort or produce nicer looking jackets than others.

Caution:
Be aware that none of the jackets produced are considered commercial benchrest quality. They are a reasonably good jacket, and a low cost way to use worn-out, Berdan primed or surplus cartridge cases for nearly free bullet jackets, but they are NOT in the same class as a commercially drawn jacket.

They work, as far as making a shootable bullet that is good enough for most hunting or informal target shooting, defense or "survival" bullet making. They do not harm barrels with normal safe loading any more than a factory bullet would. Their accuracy is usually acceptable for the intended purpose, but not in the league of bullets made with Corbin benchrest jackets. On the other hand, with enough fired cases to pick up at the local range, you could have a lifetime of fun shooting at little or no bullet cost.



Related Item(s)
Code Name Price Availability  
RFJM-22H RF Jacket Maker, -H, 224 $277.00  
RFJM-6MH RF Case Jacketmaker, 243, type -H $277.00  





Corbins.com
Main Web Site
Swage.com
Document Server
BulletSwage.com
Alternate Site
Swagedies.com
Web Store