Bullet Swaging and Reloading Presses
For more information about bullet swaging presses and how
they differ from reloading presses, look at the info on
under the "presses" topic, or click on one of the pictures
below for details about that press.
- For calibers of .458 and smaller diameter, with a length of 1.3 or less inches, the CSP-1 press and type -S dies to fit
it is the usual recommendation.
- For calibers larger than .458, or longer than 1.3 inches, or rifle jacket drawing from copper strip, the CHP-1 Hydro-
press or the CSP-2 Mega Mite press, with type -H dies, would be required. The larger presses can also make the smaller
- The Hydro-Mite CSP-1H bench model press is a good choice for high volume jacket drawing, using -S type dies. In any
operation where the same operation is to be done for an hour or more at one time, and type -S dies can be used, this
power press makes the job easier and less tiring by eliminating most of the effort.